Diamond Glass Grinder Head Bit

Der Hans führt die heute am häufigsten verwendeten und beliebtesten Diamond Glass Grinder Head Bits . Der Bohrer passt auf alle Schleifmaschinen, zum schnellen Entfernen von Glas und für große Flächen mit minimalem Abplatzen. Diamantschleifer sind in verschiedenen Körnungen für die Bearbeitung einer Vielzahl von Gläsern erhältlich. Ein ultrafeines oder feines Schleifstück eignet sich aufgrund seiner zarten Natur am besten für Spiegel, antikes oder dichroitisches Glas. Die feinen Körnungen eignen sich hervorragend zum Fertigstellen von Kanten an Schmelzstücken und beseitigen praktisch alle Abplatzungen. Rauere Schleifbits Standard- oder normale Körnungen formen Glas schnell und effektiv. Die gröberen Bits maximieren den Biss und sorgen gleichzeitig für einen gleichmäßigen Schliff. Diamond Grinder Bits ist ein Stahlsubstrat und verchromt für Leistung, Festigkeit und Haltbarkeit. Hochwertige Diamantschleifer zum Schleifen oder Gravieren von elektrischen Maschinen, Edelsteinen, Glas usw. Eine Reihe von Schleifern in Ihren Buntglasvorräten ermöglicht ein schnelles, aggressives Schleifen und einen feinen letzten Schliff für das Endprodukt. Wir können alle Arten von Ersatz-Diamantschleifern für Glastar, Inland, Gryphon und andere Markennamen liefern. Diese Bits gleiten bei allen Inland-, Glastar-, Gryphon- und Red Diamond Techgrindern über die Oberseite des Schachts.

Siehe unsere anderen Angebote.

Schlüsselwörter: Schleifkopf, Schleifköpfe, Mosaikzangen, Glasschneider, Spiegelfliesen, Mosaikschneider, Glasabschnitte, Laufzangen, Bleilicht, Werkzeuge, Glasmalerei, Glasmalerei, Blei kam Schraubstock, Schraubstock, Bleilichtwerkzeuge, Mosaikwerkzeuge, Glas Schneidwerkzeuge, Glasschleifer, Glasschleifer

1/4" Diamond Stained Glass Lapidary Grinder Adapter Head Bit

Made with a patented diamond bonding process for extra long life. Fits Glastar G5, G6, and G8 grinders for grinding small, tight areas. Fits Inland and Glastar G7 grinders with bit adapter. For extra control and support when grinding with this bit use the Glastar Universal Mini Table.

1" Diamond Stained Glass Lapidary Grinder Fast Head Bit

For quick glass removal and for large areas with minimal chipping. Silver Bullet bits are chrome hardened for performance, strength and durability. Bit fits all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5.

1" Diamond Stained Glass Lapidary Grinder Standard Head Bit

For quick glass removal and for large areas with minimal chipping. Silver Bullet bits are chrome hardened for performance, strength and durability. Bit fits all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5.

3/4" Diamond Stained Glass Lapidary Grinder Standard Head Bit

For quick glass removal and for large areas with minimal chipping. Silver Bullet bits are chrome hardened for performance, strength and durability. Bit fits all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5.

5/8" High Diamond Stained Glass Lapidary Glass Grinder Head Bit Adapter

Description The easy way to drill precision holes and create fine details without having to remove your ¾" or 1" grinding head!300 Series Adapter, Inland no. 40317 is required to use individual drilling drums Fits .312" (7.92 mm) arbor TIR <.0025" (.0635 mm).

  • Required for use with 1/8" (3 mm) , 1/4" (6mm), and 3/8" (10mm) drilling bits.

  • Standard 100 Grit for multi-task use.

  • Works right on top of larger diamond drums, no need to change or remove your ¾" or 1" drum before using.

  • The brass cores are manufactured on "Swiss precision" machinery for consistent and accurate tolerances.

  • Measured for true before the diamond is applied, so they spin properly on the motor shaft.

Diamond Stained Glass Lapidary Grinder Jewelry Groove Head Bits

Use the Groove Edge to create a groove around the outside of fused glass pieces, beads, stones, cabochons and more. Diamond Groove Jewelry Grinder Bit is used for shaping and grinding the edges of glass pieces and creating grooves in stained glass for wire wrapping. If you're a glass artist, these grinder bits are essential. We have a large variety of different grits available in sizes. All grinder bits are 1.4mm in thickness and come with a set-screw Allen wrench and square-shaped sponge to keep your glass piece cool while you work.

1" Diamond Stained Glass Lapidary Grinder Radius Angle Head Bits

For quick glass removal and for large areas with minimal chipping. Silver Bullet bits are chrome hardened for performance, strength and durability. Bit fits all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5.

3/4" Diamond Stained Glass Lapidary Grinder Radius Angle Head Bits

For quick glass removal and for large areas with minimal chipping. Silver Bullet bits are chrome hardened for performance, strength and durability. Bit fits all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5.

1" Diamond Stained Glass Lapidary Grinder Radius Edger Head Bit

This Diamond Glass Grinder Radius Edger Bit head combines a flat and radius (rounded) edger. Select this for mosaics or when working with exposed glass edges. Use the fine grit radius head to virtually eliminate chipping on decorative mirror edging. Standard 100 grit. Made with a patented diamond bonding process for extra long life. Fits Glastar G3, G4, G7, G12, G14 and all Inland Grinders.

1" Diamond Stained Glass Lapidary Grinder Reducing Head Bit

The grooved shape of the 1" Diamond Glass Grinder Reducing Bit tapers the glass edges and removes any irregularities in thickness. Especially useful when working with ripple or textured glass. A smooth and even edge is important for proper foil fit. Silver Bullet bits are chrome hardened for performance, strength and durability. Bit fits all Diamond Tech Max grinders. Also fits Inland and Glastar glass grinders, except Glastar G-5 and G-8.

1" Diamond Stained Glass Lapidary Grinder Ripple Head Bit

The Diamond Ripple Grinder Head is a combination head with a tapered channel for heavily textured glass. It to fit fused glass pieces into leadlight panels,can also be used in copper foiling to fit foiled glass into lead or zinc came.This ripple bit features a rippled edge coated with Popular grit industrial diamond. Use the multiple thicknesses of these edges to create attractive contours and textures in materials such as stone, marble, tile, glass and metal. Secure this bit with a set-screw on the side; an Allen wrench is included for this task.

1 / 1

Please reload

Hans Lapidary Tool Logo