8"x1.5" 1200Grit REZ Diamond Soft Lapidary Wheels
Our Premium REZ Diamond Resin Soft Wheels quality commercial grade resin bonded diamond lapidary wheels achieve superior performance, gives high quality finish. Wheels perfectly perform polishing, sanding, shaping, cabbing and grinding operations. Works with most stones and gemstones. Will work with most cabbing machines like: Covington, Cab King, Genie, Lortone and others. These wheels require a break-in period before use. Most common sizes are listed in our online shop, other sizes available upon request. Please inquire.
Premium REZ Diamond Wheels Break-In Instructions
For premium REZwheels only. First of all, please do not use this wheel dry. Use plenty of water. Failure to do so will cause damage to the wheel. These wheels are manufactured with aggressive resin bond, resulting in rough texture with sharp points. They require a break-in period prior to working on cabs or other jewelry pieces. To break-in your wheel, sand and polish a large piece of agate (or something else that is in-between 8-9 on a hardness scale) to remove excess resin bond that contains protruding diamonds and smooth down all sharp points. Using these wheels without breaking them in can cause a scratchy finish. Make sure the piece of agate or other material you are using to break-in your wheel is of no value to you. Use a piece of agate with a smooth face and a square or rough straight edge on one side (use the rough edge to knock off the very tops of the peaks only). Use the agate with plenty of water to run the wheel in.Don’t try to smooth the wheel entirely as this will wear the wheel excessively. Avoid placing sharp edged of stone onto the wheels as this will strip the resin right off. While cabbing